Skip to content
A wholesale voice buyer at night reviewing the PacketExchange route marketplace on a large monitor, with live routes, prices, ASR and caller ID type

Termination at carrier prices.The wholesale VoIP marketplace to buy and sell A-Z, CLI and NCLI routes.

Buy voice termination from carriers who list their own routes, compare price and stated quality before you send a call, and pay as you go. Selling? List your routes and reach buyers without chasing bilateral contracts.

PacketExchange Marketplace, on PacketExchange, a Minutes Network product. Screens show demo data. Source: packetexchange.io/solutions/exchange

See PacketExchange Marketplace.

Browse every route, compare them side by side, and list your own from a rate sheet.
The PacketExchange route marketplace: lowest live rate by number, then a board of voice routes with destination, caller ID type, tier, price, measured ASR and NER, and Connect

Demo data.

Live voice routes with destination, caller ID type, tier, price and measured ASR and NER, and Connect.

What it is.

One account opens every route on the marketplace. Each listing shows its rate, channel capacity, its ASR, ACD and NER measured on real buyer calls once it has carried enough of them, the ASR, ACD and PDD its seller states, and an Exchange Score: a 1 to 100 rating that stays unrated until the route has carried real traffic. Connecting a route is free and issues SIP credentials or IP authorisation on the spot.

  • Carriers and resellers

    Buy termination for your customers and resell it at your own margin.

  • Aggregators

    Add a second route per destination and bring your average cost down.

  • Route sellers

    List spare capacity once and sell it to every buyer on the marketplace.

CLI and NCLI routes, labelled on every listing.

Every voice route states what happens to the caller's number, as declared by the seller who lists it: Full CLI, where the number arrives intact; Local CLI, a local-presence number; Mixed CLI, which is not guaranteed; or No CLI. It also carries a quality tier, from premium and direct routes down to NCLI, the lowest-cost tier. Filter on either, and CLI and NCLI routes for the same destination sit side by side with their rates.

A route sold as CLI can still rewrite or strip the number further down the chain, so test it before a campaign goes on it. A caller ID test places a call over the route to a handset in the destination country and reports the number that displayed beside the number you sent, for $0.50 per reported result, charged only if the route rings.

  • Full CLI, Local CLI, Mixed CLI and No CLI, declared on every voice listing
  • Quality tiers from premium and direct down to NCLI
  • A caller ID test on any public route before you buy it
  • Filters for the traffic a route accepts: wholesale, call centre, dialler or A2P

A-Z termination, a country at a time.

A multi-country A-Z deck lists as one route per country, priced from its cheapest rate, with every destination and prefix one click away. Open any deck as a searchable table, by country or by prefix, before you connect it. Calls are billed on the longest matching prefix in the deck, and each route states its billing increment, such as 1/1, 6/6 or 60/60, before you connect.

Search by destination, country, dial code or prefix, then narrow by CLI type, tier, per-second or per-minute billing, rate range, minimum ASR and ACD, maximum PDD, capacity and minimum Exchange Score. Star the routes you track, save the searches you run every morning and compare up to four routes side by side.

Call centre and dialler routes.

Sellers state the traffic each route accepts, so a call centre or a dialler only sees routes that take its traffic. Send the campaign from your own switch over your SIP trunk, or run it from the PacketExchange dialer over the routes you choose, with CLI rotation, calling windows and DNC suppression built in.

Sell your routes to every buyer on the marketplace.

Listing is free and you keep your full rate on every call: the platform fee is paid by the buyer, on top of your rate. Upload the rate sheet you already have and destinations, prefixes and rates are read for you, and each voice route is tested against your endpoint before it is published. Keep a route private and grant it to chosen buyers, at a rate set for each buyer if you like.

Buyers see the route, its rate and its measured quality, never who listed it, and you see buyers only by pseudonym. Neither side ever receives the other's SIP endpoint. Your carrier rate is credited to your balance on every billed call, and the balance can be withdrawn by crypto or bank wire.

List in approximately two minutes

Drop in the rate sheet you already have: destinations, prefixes and rates are read for you, and each voice route is tested before it is published. Listing is free and sellers keep their full rate.

Hands on a laptop keyboard while PacketExchange reads an uploaded rate sheet and shows the rates, countries and destinations it will list

Demo data.

And more.

  • Both sides stay anonymous

    Buyers compare routes, not carriers, and sellers see buyers only by pseudonym. Neither side ever receives the other's SIP endpoint.

  • Offers and private routes

    Offer below list on a single-price route, turn by turn. Sellers can keep a route off the public marketplace and grant it to chosen buyers at their own rate.

  • Watchlist, saved searches, compare

    Star the routes you track, save the filters you run every day, and lay up to four routes side by side.

  • Route reports with a re-test

    Report a failing route with the call record attached. When the seller marks it fixed, the exchange re-tests their endpoint automatically.

  • Least-cost routing

    Send each call down the cheapest route you hold. Failover to the next runs in route groups on the hosted switch.

Platform fee over your own SIP trunk, max $0.001 a call
0.5%
Platform fee over your own SIP trunk, max $0.001 a call
Platform fee via API or Dialer, max $0.001 a call
2%
Platform fee via API or Dialer, max $0.001 a call
Seller fee: you keep your full rate
$0
Seller fee: you keep your full rate
Smallest top-up, by card or crypto
$5
Smallest top-up, by card or crypto

As published on packetexchange.io.

How it works.

  1. 01

    Open and fund an account

    The account is free. Top up from $5 by card or crypto, or from $100 by bank wire.

  2. 02

    Filter every listed route

    Narrow by destination or prefix, CLI type, quality tier, billing increment, rate, ASR, ACD, PDD, capacity and minimum Exchange Score.

  3. 03

    Connect it, or make an offer

    Connecting a route costs nothing and issues its SIP credentials on the spot. Want a better rate? Make an offer, and if the seller accepts, the purchase is created at the agreed price.

  4. 04

    Send calls, pay per call

    Each call is billed when it ends, at the route rate plus a capped platform fee, straight from your balance.

Questions

Can I see which carrier is selling a route?
No. A listing shows the route: destination, quality tier, CLI type, rate, ASR, ACD, PDD, capacity and Exchange Score. The seller appears as "Marketplace seller" with their verification status and average score. Sellers see buyers by pseudonym too, and neither side ever receives the other's SIP endpoint.
What is the Exchange Score?
PacketExchange's own 1 to 100 rating for a route, calculated from its quality tier and its measured ASR, NER, ACD and PDD once it has carried enough recent calls, or from the figures its seller states until then. Until a route has carried real traffic it reads "New".
Does it cost anything to connect a route?
No. Connecting a route is free and issues its SIP credentials straight away. You pay only when traffic flows: per call, at the route rate plus the capped platform fee.
Do you have NCLI routes as well as CLI routes?
Yes, wherever sellers list them. Every voice route states its CLI type (Full CLI, Local CLI, Mixed CLI or No CLI) and its quality tier, so you can filter for CLI or NCLI termination and compare the rates side by side.
How do I send traffic to a route I have connected?
Whitelist your switch's public IP, or use the SIP username and password issued with the purchase, and point your trunk at your Switch IP on port 5060 over UDP or TCP with G.711a, G.711u or G.729. Every setting sits on one page of your dashboard.
Can I negotiate the rate?
Yes, on routes with a single price. Make an offer below list and, if the seller accepts, the purchase is created at the agreed price. An A-Z deck bills each destination on its longest matching prefix, so it does not take offers.
Are there extra checks for US routes?
Yes. Buying a US voice route needs a complete STIR/SHAKEN compliance profile first, and the purchase is reviewed before it can carry traffic.
How do sellers get paid?
Each billed call credits the seller's carrier rate to their balance as the call is settled, and that balance can be withdrawn by crypto or bank wire.

Termination at carrier prices.

Buy and sell wholesale voice and SMS routes, priced and measured, pay as you go.